Before you can register a node, you must register a device here.
After selecting a group, from the menu select "Nodes".
Click the "Add Node" button.
The Add Node window will be displayed. To cancel the node registration process click the "x" in the upper-right corner. Fill in the required fileds then click the "Add" button.
|Name||Enter a name.|
|Template||Set a template.|
|Note||Enter a description.|
|Serial ID||Enter the serial ID of the neqto: Bridge.|
|ENVIRONMENT VALS||Enter the environment variables for the node.|
※To use environment variables in the code, enter ENV."key"(example:ENV.KEY).
From the "Nodes" screen verify the registration.
|Link to the node. Opens the node screen.|
|Opens the Control Center menu.|
|Opens the information settings window.|
For the next tutorial, click the link to the node that was just registered.
Control Center menu
|Reboot||Reboot the device. Rebooting the device will also reload the script.|
|Reload Script||Download the newest version of the neqto.js script from the cloud and begin executing it.|
|FOTA -> Device Firmware||Executes FOTA on the actual neqto: device. The device firmware set in the template will be used.|
|FOTA -> Component Firmware||Executes FOTA on connected sub-devices. Uses the component firmware set in the template.|
|NB (Next Boot) FOTA -> Device Firmware||On the device's next boot, the firmware will be downloaded and FOTA will be triggered on the actual neqto: device. The device firmware set in the template will be used.|
|NB (Next Boot) FOTA -> Component Firmware||On the device's next boot, the firmware will be downloaded and FOTA will be triggered on the connected sub-devices. The component firmware set in the template will be used.|
|Custom CMD||Send a custom MQTT command to the device.|
|Renew Client Certificate||Replace the device's client-side SSL certificate.|
|Factory Reset||Resets the device to its factory conditions. This will erase all changes made to the device, so remote operation will become impossible. The initial setup procedure must be repeated before it can be used again.|